Chapter 2· Groove OS 2.0 beta

Learn on your FM-1

Play along as you read: the FM-1 beside the text is a working one, running the real Groove OS 2.0, and it follows the part of the page you are reading. Tap a control's name in the text to find it on the panel, and press Start on a Try it card to be shown. Sound stays off until you turn it on.

Learn is six short courses that run on the FM-1 itself: no computer, no screen but the FM-1's own, no connection. Take it on a train or to the park. A card says what to try next, you play, and the FM-1 notices when you have really done it. The music you make is yours, and it keeps playing while you learn.

What you need

Groove OS 2.0 on the FM-1 (see Installing). The six courses come with it: there is nothing to add. Tap for SETTINGS, then turn down to LEARN, the last row, to start one. Starting a course uses no song slot, and your songs, sounds, samples and favourite sounds stay just as they are.

The courses

No.	Course, as the FM-1 names it	What you play
1	`FIRST GROOVE`	Your first groove, from silence, in a few minutes.
2	`LOCK IT IN`	Swing, a tighter kit and a bassline that locks in.
3	`YOUR SOUND`	Make a preset your own: four knobs and two effects.
4	`SPACE + MIX`	Every part in its place: levels, reverb and delay.
5	`PLAY IT LIVE`	Drops, throws, punch-ins and scenes, on the bar.
6	`SAMPLE IT`	Record a sound, chop it across the pads and play it in your song.

They follow on from each other, but you can start anywhere. Each one also runs in your browser, on Learn, to try before you pick up the FM-1.

Sample It is for the SAMPLER. It starts from a groove written for you (DRUMS, BASS and KEYS, rolled at 100 BPM): press to hear it. In nine steps and four chapters, CHAPTER 1: RECORD, CHAPTER 2: CHOP, CHAPTER 3: IN THE SONG and CHAPTER 4: KEEP IT, you record a sound, chop it across the pads, play the chops with the beat, tune a pad, put your kit on a new track so it plays in the song, make an instrument and play it across the keys, find everything in SAMPLES and save. It is how you make your own kit on 2.0.

To record, turn to the SAMPLER, press on + NEW KIT, and either play something from a phone into the USB-C port with on USB, or, with no cable, press and set to MAIN to record the FM-1 itself. Press to start and again to stop. Step 1 counts when the take lands on pad 1, whichever way it came. Step 2 counts when the chops are on the pads, steps 3 and 7 when a pad or an instrument key really plays (step 3 while the song plays), step 4 when you turn (TUNE) on a pad, step 5 when the new track plays your kit, step 6 when the song plays with notes on it, step 8 when you turn on SAMPLES, and step 9 when the song is saved.

Opening a course

Tap for SETTINGS, turn down to LEARN (the last row) and press . The six courses are listed in order. Turn to one and press .

If the project you have open has changes you have not saved, the FM-1 says SAVE YOUR PROJECT THEN OPEN LEARN. Press , then try again.
Otherwise it asks first, with the course's name and THE MUSIC STOPS. CANCEL is chosen first: turn to START and press . The course starts on a fresh song, on TRACKS, with its first card showing.

Starting a course uses no song slot: the course is the song you are working on, the autosave keeps it, and it is there again when you switch on. It takes a slot only when you save it, which is the course's last step. Your saved songs stay as they are.

Not sure where Learn is? Tap : SETTINGS opens, and LEARN is its last row. Hold for a second on SETTINGS and let go, and its card says so too: THE LAST ROW, LEARN, HAS THE COURSES. Any control, or again, puts it away.

Inside a course the hold shows the step's card instead of the page's: a tap still opens SETTINGS, and holding for a second shows or hides the card.

Try it·On the FM-1

LEARN is under the cursor, the last row of SETTINGS. Press SEL for the six courses.

SEL

Coming back to a course

Your progress lives in the song. Switch the FM-1 on and the autosave brings the course back where you left it; a course you saved opens from PROJECT (its slot, LOAD). Hold and the card is on the step you were on. Choosing the course again in LEARN starts it fresh, on a new song.

First Groove

First Groove starts from silence, on a fresh song with four tracks ready to play: DRUMS (the PUNCH kit), BASS (FAT BASS), KEYS (SOFT KEYS) and LEAD (VIBES). There are no notes yet. The tempo is 110 BPM with a little swing, the key is A minor and the arpeggiator's LATCH is on. Everything you hear by the end, you made.

It has eleven steps in four chapters: CHAPTER 1: BEAT, CHAPTER 2: KEY AND CHORDS, CHAPTER 3: MOTION and CHAPTER 4: YOUR GROOVE. The card titles are the FM-1's own words.

Beat

Step	Card	What you do	What you learn
1	`MAKE A BEAT`	On DRUMS, hold and tap . DICE writes a beat. Roll again for another.	DICE writes a beat for you, in notes you can change.
2	`HEAR YOUR BEAT`	Press . Your drums loop. Listen as long as you like.	A tap of takes back the last roll, if you liked the one before better.

Try it·On the FM-1

This is the real course. Hold HOME and tap SEQ: DICE rolls a beat on DRUMS, and step 1 is earned.

HOMESEQ

Key and chords

Step	Card	What you do	What you learn
3	`CHOOSE YOUR KEY`	Tap until you are on TRACKS and turn to the KEYS track. Turn to KEYS and turn to `D` (it is minor already), then play the white keys.	The root is the home note; the scale is the mood. Set them before you record notes.
4	`STAY IN KEY`	Turn (`IN KEY`) to `WHITE` and play the white keys.	With `WHITE`, every white key is a note of D minor, so nothing you play is wrong.
5	`ONE FINGER CHORDS`	Turn (`CHORDS`) to `PLAY`. With the beat playing (tap if it stopped), hold one white key and hear a chord. Try the others.	One key plays several notes, and every key gives a chord that fits.

Try it·On the FM-1

Step 3: turn ALGORITHM to the KEYS track, SELECT to KEYS, K1 to D, then play a few white keys.

ALGORITHMSELECTK1

Motion

Step	Card	What you do	What you learn
6	`MAKE IT MOVE`	Tap and hold one white key. Your chord becomes a phrase.	The arpeggiator plays the chord note by note. LATCH keeps it going when you let go.
7	`CHANGE ITS SHAPE`	On ARP, turn (`MODE`).	The same chord in a new order. Try (`RATE`) too: fast or slow.
8	`PRINT THE PHRASE`	On ARP, with the phrase playing, press . The arpeggiator stops and the copy plays.	PRINT turns what the arpeggiator plays into notes on the track, so they stay when the arpeggiator is off.

Your groove

Step	Card	What you do	What you learn
9	`ADD THE BASS`	Hold and turn to BASS. Still holding HOME, tap to roll a bass line.	The bass joins at the next bar, and DICE writes it in the scale you chose.
10	`MAKE IT YOURS`	On TRACKS, with BASS selected, turn (`CUTOFF`) and hear it change.	Low is warm, high is bright. Jam as long as you like.
11	`SAVE YOUR GROOVE`	Stop the music and tap .	Your notes and your progress are saved together. To name it: PROJECT, its slot, `RENAME`, then save again.

Each chapter of this manual goes deeper: DICE, KEYS, ARP, PRINT and saving.

The card

The card fills the screen while it is open. The top line says where you are (STEP 03 / 11), then comes the step's title and what to do now. Under that come ALGORITHM: LOOK BACK, the chapter the step is in (CHAPTER 2: KEY AND CHORDS), and a row of eleven segments, grouped by chapter, that shows the steps you have earned. The two lines at the bottom remind you of the controls: SELECT: NOW / WHY / OPTIONS and GLO: SETTINGS HOLD: THE CARD.

Control	What it does with the card open
(hold a second)	Hides the card: back to playing. Hold again to see it.
(tap)	Opens SETTINGS.
	Turns between three pages: `NOW` (what to do), `WHY / LISTEN` (why it works, and what to listen for) and `OPTIONS`.
	On `NOW` and `WHY / LISTEN`: looks back at earlier steps. The top line says `READING EARLIER STEP`; turn it back to return to the step you are on. On `OPTIONS`: picks a row.
	On `NOW` and `WHY / LISTEN`: closes the card. On `OPTIONS`: does the row.
	Starts and stops the music. The card stays open.
	Closes the card. Held, it is still HOME, so works with the card open.
The keys, to , and every other button	Close the card and do their usual job at once.

While the card is hidden, the bottom line of the screen says which step you are on and how to see it again: STEP 03 / 11 and HOLD GLO: GUIDE. When you earn a step, the card stays out of your way: the line says STEP 03 COMPLETE for a moment and the music plays on. When that step finishes a chapter and you earned every step in it, it says CHAPTER 2 EARNED instead. Hold when you want the next step.

Earned by playing

A step counts only when you have really done it and heard it. The FM-1 listens to what you actually play, not to which settings you changed: a note in D minor on the KEYS track, a chord of three notes sounding while the beat plays, the arpeggiator running. Turning to D alone does not earn step 3, and a black key that stays silent in WHITE does not earn step 4.

Each earned step fills its segment, and the segments sit in four groups, one for each chapter. The step you are on has a short mark. Nothing is earned while you record.

Options

Turn to OPTIONS, pick a row with and press .

Row	What it does
`SKIP STEP`	Moves on to the next card without earning this one: its segment stays empty. On the last step the row reads `BACK TO PLAY` and closes the card.
`FREE PLAY`	Pauses the guide. The step line goes from the bottom of the screen and nothing is checked, so you can just play. Hold for the card.
`FINISH GUIDE`	Puts the guide away: the step line goes and nothing is checked. Holding still shows the card, where `RESUME GUIDE` brings the guide back.

After FREE PLAY or FINISH GUIDE, the first row reads RESUME GUIDE: it takes you back to the step you were on.

Try it·On the FM-1

Turn SELECT to OPTIONS and press SEL on SKIP STEP: the course moves on without earning it.

SELECTSEL

The last step

The last step needs a real save: the song written to its slot. If the save does not finish (SAVE FAILED: OLD SAVE KEPT), the step is not earned; save again. Once it is saved, the card opens on TRACKS with YOUR GROOVE IS SAVED. If you earned every step it says YOUR FIRST GROOVE. MADE BY YOU.; if you skipped some, YOUR GROOVE IS READY.. Then: NEXT: PLAY IT IN A NEW KEY.

Starting again

Choose the course again in SETTINGS > LEARN: it starts on a fresh song, from step 1, with every step there to earn again. The song you were on is not kept unless you saved it, so press first if you want it: a saved course stays in its slot, progress and all.

Your progress is part of the song

Where you are in the guide, the segments you earned, and whether it is paused or finished are saved with the course's song, like its notes. Save the song and load it another day: it opens where you left off. A song you export on the Projects page carries its progress too.

Progress works like the rest of the song: the autosave brings it back after you switch off, and keeps it in the song's slot.

Before a trip

The courses are on the FM-1 already. For the rest, get it ready before you go: sound packs from the Sounds page. Once they are on the FM-1, everything plays offline, and so do the sounds you record yourself on the SAMPLER.

Troubleshooting

What happens	Why, and what to do
`SAVE YOUR PROJECT THEN OPEN LEARN`	The project you have open has unsaved changes. Press , then open `LEARN` again.
`LEARN` shows one dimmed row, `ADD THE COURSES FROM THE WEBSITE`	The courses are missing on this FM-1. Run the install again from the 2.0 beta page: it puts the six courses back.
`LEARN` does nothing	Something else is going on: a question is open, the FM-1 is saving or loading, or you are recording or counting in. Finish that first.
A tap of opens SETTINGS, not the card	A tap is always SETTINGS. In a course, hold for a second for the card.
Holding shows a card about the page, not a step	This song is not a course. Load your saved course from PROJECT, or start one in SETTINGS > `LEARN`.
I did the step and it did not count	The FM-1 waits until it hears it. Check the card's details: the right track selected (the card names it), the music playing for steps that loop, a white key with `IN KEY` on `WHITE`, and `CHORDS` still on `PLAY` for the arpeggiator. If you chose `FREE PLAY`, `RESUME GUIDE` first.
A step's segment stayed empty	You moved on with `SKIP STEP`. To earn every step, start the course again from SETTINGS > `LEARN` (save this one first if you want to keep it).
The step line is gone from the bottom of the screen	The guide is paused (`FREE PLAY`) or finished, or you are on a menu. Hold for the card.
The last step did not count after	The save did not finish. Stop the music and save again.
I want empty tracks again	Choose the course again in SETTINGS > `LEARN`: a fresh song, from step 1.